Ohio Manufacturing Institute
Skip to content

Category Archives: Uncategorized

« Older posts

DIAMTS

By Kristina | Published: September 21, 2011

Clipped from: diamts.com (share this clip) Interested in the global automotive market? Check out the 2011 Detroit International Advanced Manufacturing Show. According to the website, the show will focus on three key areas of Detroit’s needs to help stimulate the auto industry.

Also posted in Blog, Companies, Events | Comments closed

Conference: Interactive Manufacturing Experience

By Kristina | Published: April 7, 2011

What:  Interactive Manufacturing Experience Where:  Las Vegas, NV When:  September 12-14, 2011 Details:  Set to change the face of the manufacturing industry…imX—the interactive manufacturing eXperience (pronounced i-m-x) brings together the most powerful names in U.S. manufacturing for a groundbreaking three-day event. Conference Website:  http://www.imxevent.com/imx2011/public/mainhall.aspx?ID=152   

Also posted in Events | Comments closed

National Association of Manufacturers’ Manufacturing Summit

By Kristina | Published: April 7, 2011

What:  National Association of Manufacturers’ Manufacturing Summit Where:  Washington, D.C. When:  June 15-16, 2011 Conference Website:  http://www.nam.org/Get-Involved/Manufacturing-Events/Events/2011/06/Manufacturing-Summit.aspx 

Also posted in Events | Comments closed

Association for Manufacturing Excellence, How do you Measure Up for Success in 2011

By Kristina | Published: April 7, 2011

What:  Association for Manufacturing Excellence, How do you Measure Up for Success in 2011 Where:  Calgary, Canada When:  June 6-10 Details:  The AME/CME Calgary 2011 Regional Conference has been created to help organizations learn new ways to save both time and money. Practitioners, sharing their Continuous Improvement perspectives that have proven to improve bottom-line results. Conference [Read more ...]

Also posted in Events | Comments closed

2011 RAPID Conference on Additive Manufacturing

By Kristina | Published: April 7, 2011

What:  2011 RAPID Conference on Additive Manufacturing Where:  Minneapolis, MN When:  May 24-26, 2011 Details:  The RAPID Conference and Tradeshow is North America’s Definitive Additive Manufacturing Event and is co-located with the 3D IMAGING event. Additive manufacturing technologies are rapidly gaining acceptance in several diverse industries including aerospace and defense, architecture, medical, motor vehicles, consumer [Read more ...]

Also posted in Events | Comments closed

Conference: Manufacturing Innovations 2011

By Kristina | Published: April 7, 2011

What: Manufacturing Innovations 2011 Conference Where: Orlando, FL When:  May 14-18, 2011 Details:  Every year over 700 manufacturers, industry experts and MEP field staff join together to learn and connect, bringing the experience back to their organizations and continuing to build a strong & competitive U.S. manufacturing base. The event truly brings the “voice of [Read more ...]

Also posted in Events | Comments closed

WORKSHOP: Layout Design for High-Mix Low Volume Manufacturing Facilities

By Kristina | Published: February 14, 2011

WHAT: Layout Design for High-Mix Low-Volume Manufacturing Facilities WHEN:  June 9-10, 2011 WHERE:  The Ohio State University (Columbus, Ohio), Baker Systems Engineering Building (Room 281) with parking available at the Tuttle Parking Garage Is your Facility Layout Designed for High-Mix Low-Volume (HMLV) Manufacturing? Typically, a small and medium manufacturer (SME) tends to be a high-mix [Read more ...]

Also posted in Events | Comments closed

Ohio Economic-Education Summit IV – AEROSPACE SECTOR

By Kristina | Published: February 9, 2011

Ohio Economic-Education Summit IV February 21-23, 2011 Hyatt Regency Columbus Don’t miss some of the top industry speakers at the Aerospace and Aviation Sector at the Ohio Economic-Education Summit IV, on February 22nd at the Hyatt Regency in Columbus, Ohio. Starting at 10:15 a.m. – 4:30 p.m. on Tuesday, February 22nd, Industry and academic experts [Read more ...]

Also posted in Events | Comments closed

Midwest SAMPE Presents: Direct Part Manufacturing Workshop

By Kristina | Published: December 2, 2010

Event Information Direct Part Manufacturing Workshop  Wright State University  Dayton OH USA March 29, 2011 to March 30, 2011  Description The Midwest Society for the Advancement of Material and Process Engineering (SAMPE) will host Direct Part Manufacturing Workshop on March 29-30, 2011 at Wright State University.  For more information, please visit the following site:  http://www.midwestsampe.org/content/files/events/DPM%202011%20Flyer%201.revised.pdf

Also posted in Events | Comments closed

PMA Presents: Manufacturing for Growth Meeting

By Kristina | Published: December 2, 2010

Event Information Manufacturing for Growth Meeting  Chandler, AZ USA  March 3, 2011 to March 6, 2011  Description The MFG Meeting (Manufacturing For Growth) brings together business owners and C-Level executives from around the country for a 4-day forum (March 3-6, 2011 in Chandler, AZ) on how we can synergize our resources to restore manufacturing to [Read more ...]

Also posted in Events | Comments closed
« Older posts
  • Site Map

    • About
    • Resources
    • Past Events
    • Calendar
    • Contact Us
    • International MFG News
    • U.S. MFG News
  • Manufacturing Events

    1. May
      16
      Wed

      1. 8:00 am Skilled Labor Workforce: U.S. and European Perspectives
    2. May
      29
      Tue

      1. EnergyTech 2012
    3. Jun
      3
      Sun

      1. 2012 Annual SME Conference
    View Calendar »
  • OMI Information Brochure

    Printable OMI Flyer

  • Join OMI on LinkedIN

  • Login

  • Get Involved!

    Contact us by email at: omi-requests@osu.edu
  • Links

    • Ohio State University College of Engineering
  • RSS Links

    • All posts
    • All comments
Powered by WordPress. Design by M42 Designs.