The 4th International Conference on High Speed Forming was held in Columbus Ohio March 9 &10, 2010.

This builds on several past successful conferences that have been held in Dortmund, Germany, and was organized in association with the International Impulse Forming Group (I2FG.org). The conference was devoted to using high strain rates and short-time impulse methods for metal forming.

**Some of the links below may require latest versions of QuickTime or Javascript access.

The entire .pdf proceedings for the entire conference series will be available here in their full form

4th International Conference on High Speed Forming, Columbus, OH, USA, 2010
3rd International Conference on High Speed Forming, Dortmund, Germany, 2008
2nd International Conference on High Speed Forming, Dortmund, Germany, 2006
1st International Conference on High Speed Forming, Dortmund, Germany, 2004

All series are available with permanent links, or handles at the Library of the Technical University of Dortmund.  The conference series in 2010 produced peer reviewed papers and the slides and presentations were captured when possible.  The full proceedings form that meeting can be found below in individual presentation form.

ICHSF 2010 papers, talk slides, video, Handle ID

Introduction

Glenn Daehn’s Introduction (pdf)

Session I: Industrial Processes | Session Co-Chairs: C. Beerwald, K. Faes

A Historical Review of High Speed Metal Forming – Zittel, G

Slides (pdf)  Handle ID (external link)

Electromagnetic Pulse Forming Technology. Keys for Allocating the Industrial Market Segment – Schäfer, R; Pasqaule, P

Slides (pdf) Handle ID (external link) video (or click below to play)

Powder Forming Using Dynamic Magnetic Compaction – Chelluri, B;  Knoth, E

Slides (pdf) Handle ID (external link) video (or click below to play)

Agile Production of Sheet Metal Aviation Components Using Disposable Electromagnetic Actuators – Woodward, S; Weddeling, C; Daehn, G; Psyk, V; Carson, B; Tekkaya, E

Slides (pdf) Handle ID (external link) video (or click below to play)

Commercialization of Fuel Cell Bipolar Plate Manufacturing by Electromagnetic Forming – Shang, J; Wilkerson, L; Hatkevich, S; Daehn, G

Slides (pdf) Handle ID (external link) video (or click below to play)

Session II: Electrohydraulic Forming | Session Co-Chairs: C. Beerwald, K. Faes

Electrohydraulic Forming for Automotive Application – Golovashchenko, S

Investigation of the Electrohydraulic Forming Process with respect to the Design of Sharp Edged Contours – Homberg, W; Beerwald, C; Pröbsting, A

Slides (pdf) Handle ID (external link)

Pressure Heterogeneity in Small Displacement Electrohydraulic Forming Processes – Vohnout, V; Fenton, G; Daehn, G

Slides (pdf) Handle ID (external link) video (or click below to play)

Measurements of Pressure Fields with Multi-Point Membrane Gauges at Electrohydraulic Forming
Knyazyev, M; Zhovnovatuk, Y

Handle ID (external link)

Session III: Welding/Joining | Session Co-Chairs: C. Beerwald, K. Faes, S. Golovaschenko, I. Eguia

Welding and Forming of Sheet Metals Using Magnetic Pulse Technology – Kashani, M; Aizawa, T; Okagawa, K

Slides (pdf) video (or click below to play)

Joining of Copper to Brass Using Magnetic Pulse Welding – Faes, K; Baaten, T; De Waele W.; Debroux, N

Slides (pdf) Handle ID (external link)

Impact Welding in a Variety of Geometric Configurations – Zhang, Y; Babu, S; Daehn, G

Slides (pdf) Handle ID (external link) video (or click below to play)

Modeling Pulse Magnetic Welding Processes – An Empirical Approach – Uhlmann, E; Ziefle, A

Slides (pdf) Handle ID (external link) video (or click below to play)

Fundamentals of EMPT-Welding – Elsen, A; Groch, P

Slides (pdf) Handle ID (external link)

Insights into Intermetallic Phases on Pulse Welded Dissimilar Metal Joints – Goebel, G; Kaspar, J; Herrmannsdoerfer, T; Brenner, B; Beyer, E

Slides (pdf) Handle ID (external link)

Development of Design Principles for Form-fit Joints in Lightweight Frame Structures – Weddeling, C; Woodward, S; Nellesen, J; Psyk, V; Marré, M; Brosius, A; Tekkaya, A; Daehn, G; Tillmann, W

Slides (pdf) Handle ID (external link) video (or click below to play)

Session IV: Metal Forming and Cutting | Session Co-Chairs: S. Golovaschenko, I. Eguia

Impulse Hydroforming Method for Very Thin Sheets from Metallic or Hybrid Materials – Beerwald, C; Beerwald, M; Dirksen, U; Henselek, A

Handle ID (external link)

Warm Electromagnetic Forming of AZ31B Magnesium Alloy Sheet – Ulacia, I; Arroyo, A; Eguia, I; Hurtado, I; Gutierrez, M

Slides (pdf) Handle ID (external link) video (or click below to play)

Effects of Force Distribution and Rebound on Electromagnetically Formed Sheet Metal – Imbert, J; Worswick, M; L’eplattenier, P

Slides (pdf) Handle ID (external link) video (or click below to play)

Simulation of Wrinkle Formation in Free Electromagnetic Tube Compression – Demir, O; Psyk, V.; Tekkaya, A

Handle ID (external link)

Texture Evolution of AZ31B Magnesium Alloy Sheet at High Strain Rate – Ulacia, I; Yi, S; Pérez-Prado,M; Dudamell, N; Galvez, F; Letzig, D; Hurtado, I

Slides (pdf) Handle ID (external link) video (or click below to play)

Electromagnetic Forming of Longitudinal Strengthening Ribs in Roll Formed Automotive Profiles – Eguia, I; Mangas, A; Iturbe, R; Gutiérrez, M

Slides (pdf) Handle ID (external link) video (or click below to play)

Microflanging of CuZn30 Specimens Using Electromagnetic Forming – VanBenthysen, R; Kinsey, B

Slides (pdf) Handle ID (external link) video (or click below to play)

Session V: Modeling and Simulaton | Session Co-Chairs: R. Schäfer, E. Tekkaya

Mathematical Modeling of an Electromagnetic Forming System with Flat Spiral Coils as Actuator – Paese, E; Geier, M; Pacheco, J; Homrich, P; Ortiz, J C S

Slides (pdf) Handle ID (external link) video (or click below to play)

Characterisation and Simulation of High-Speed-Deformation-Processes – Engelhardt, M; Haverkamp, H; Liang, S; Kiliclar, Y; Schwarze, M; Vladimirov, I; Bormann, D; Bach, F-W; Reese, S

Slides (pdf) Handle ID (external link) video (or click below to play)

Dimensional Control and Formability in Impact Forming – Srinivasan. S; Wang, H; Taber, G; Daehn, G

Slides (pdf) Handle ID (external link) video (or click below to play)

An MPP version of the Electromagnetism Module in LS-DYNA for 3D Coupled Mechanical-Thermal-Electromagnetic Simulations – L’Eplattenier, P; Ashcraft, C; Ulacia, I

Slides (pdf) Handle ID (external link)

Proposal for a Test Bench for Electromagnetic Forming of Thin Metal Sheets – Geier, M; Paese, E; Pacheco, J; Homrich,P; Ortiz, J C S

Slides (pdf) Handle ID (external link)

Session VI: Constitutive Effects | Session Co-Chairs: R. Schäfer, E. Tekkaya

Dynamic Characterization of Powdered Ceramics – Fenton, G

Handle ID (external link)

Influence of Different Process Parameters on Deformation Velocity in Laser Shock Forming – Wielage, H; Vollertsen, F

Handle ID (external link)

Consititutive Relation Development Through the FIRE Test – Johnson, J; Taber, Daehn, G

Slides (pdf) Handle ID (external link) video (or click below to play)

Construction of the Hill48 and Yld89 for Auto-body Steel Sheets Considering the Strain Rate – Lee, C; Bae, G; Kim, S; Lou, Y; Huh, H

Handle ID (external link) video (or click below to play)