You are here

Glenn Daehn

  • Fontana Professor, Materials Science Engineering
  • 2041 College Road
    Columbus, OH 43210
  • 614-292-6779

About

Glenn Daehn, PhD, is founding executive director of the Ohio Manufacturing Institute, developing the initial mechanisms to promote and improve engineering services and engagements between Ohio manufacturers and academia. He currently has leadership roles in several of Ohio State initiatives and programs related to advanced manufacturing, manufacturing technology development, application, and ecosystem advancement. 

Honors

  • 20090101

    Innovators Award of Ohio State College of Engineering.

  • 20070101

    ASM Jacquet-Lucas Award for Excellence in Metallography.

  • 20040101

    Lumley Research Award of Ohio State University College of Engineering.

  • 20000101

    Lumley Research Award of Ohio State University College of Engineering.

  • 19940101

    Winner of conference best paper award, Ceramic Entineering and Science.

  • 19920101

    Lumley Research Award of Ohio State University College of Engineering.

  • 19920101

    Army Research Office Young Investigator Award.

  • 19920101

    Robert Lansing Hardy Gold Medal of TMS.

  • 19920101

    National Young Investigator.

  • 19900101

    ASM Marcus A. Grossmann Young Author Award.

Chapters

2005

  • 2005. "High Velocity Metal Forming." In ASM Handbook, Volume 14B, Metalworking: Sheet Forming,

1996

  • 1996. "Modeling of Enhanced Composite Creep and Plastic Flow in Temperature Cycling." In (invited chapter) Numerical Analysis and Modeling of Composite Materials, edited by J. W. Bull,

1995

  • 1995. "Hyperplasticity - A Competitor to Superplastic Sheet Forming?." In Superplasticity and Superplastic Forming, edited by A. K. Ghosh and T. R. Bieler,

1994

  • 1994. "Effects of Transformation and Chemistry on the Microstructure and Properties of Co Continuous Ceramic Composite Materials." In Composite Materials: Commonalty of Phenomenon, Proceedings of TMS Annual Meeting, edited by K. K. Chawla, P. K. Liaw and S. G. Fishman,

Journal Articles

2019

  • Gupta, V.; Lee, T.; Vivek, A.; Choi, K.S. et al., 2019, "A robust process-structure model for predicting the joint interface structure in impact welding." Journal of Materials Processing Technology 264, 107-118 - 107-118.

2018

  • Agrawal, A.K.; Singh, A.; Vivek, A.; Hansen, S. et al., 2018, "Extreme twinning and hardening of 316L from a scalable impact process." Materials Letters 225, 50-53 - 50-53.
  • Kapil, A.; Lee, T.; Vivek, A.; Bockbrader, J. et al., 2018, "Benchmarking strength and fatigue properties of spot impact welds." Journal of Materials Processing Technology 255, 219-233 - 219-233.
  • Daehn, G.S.; Taub, A., 2018, "Metamorphic manufacturing: The third wave in digital manufacturing." Manufacturing Letters

2017

  • Wang, H.; Vivek, A.; Wang, Y.; Viswanathan, G. et al., 2017, "High strain rate embossing with copper plate." International Journal of Material Forming 10, no. 5, 697-705 - 697-705.

2016

  • Wang, H.; Vivek, A.; Wang, Y.; Taber, G. et al., 2016, "JLA." LIA Today 24, no. 5, 25 - 25.
  • Y. Lu, H. Song, G. A. Taber, D. R. Foster, G. S. Daehn and Wei Zhang, 2016, "In-Situ Measurement of Relative Motion during Ultrasonic Spot Welding of Aluminum Alloy using Photonic Doppler Velocimetry." Journal of Materials Processing Technology 231, 431-440 - 431-440.

2015

  • Taber, G.A.; Vivek, A.; Coffey, J.; Daehn, G.S., 2015, "Openable electromagnetic actuator as a non-contact, agile tool for crimping operations." Manufacturing Letters 5, 21-24 - 21-24.

2012

  • Brandes,M,C; Kovarik,L; Miller,M,K; Daehn,G,S; Mills,M,J, 2012, "Creep behavior and deformation mechanisms in a nanocluster strengthened ferritic steel." ACTA MATERIALIA 60, no. 4, 1827-1839 - 1827-1839.

2010

  • Unocic,K,A; Mills,M,J; Daehn,G,S, 2010, "Effect of gallium focused ion beam milling on preparation of aluminium thin foils." JOURNAL OF MICROSCOPY 240, no. 3, 227-238 - 227-238.
  • Unocic,Kinga,A; Hayes,Robert,W; Mills,Michael,J; Daehn,Glenn,S, 2010, "Microstructural Features Leading to Enhanced Resistance to Grain Boundary Creep Cracking in ALLVAC 718Plus." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 41A, no. 2, 409-420 - 409-420.

2009

  • Johnson,Jason,R; Taber,Geoff; Vivek,Anupam; Zhang,Yuan; Golowin,Scott; Banik,Kristin; Fenton,Gregg,K; Daehn,Glenn,S, 2009, "Coupling Experiment and Simulation in Electromagnetic Forming Using Photon Doppler Velocimetry." STEEL RESEARCH INTERNATIONAL 80, no. 5, 359-365 - 359-365.

2008

  • Daehn, G.S.; Unocic, K.A., 2008, "Jacquet-Lucas Award: TEM sample preparation method for grain boundary phase identification in Al-Mg alloys." Advanced Materials and Processes 166, no. 2, 42-43 - 42-43.
  • Daehn,Glenn,S; Unocic,Kinga,A, 2008, "TEM sample preparation method for grain boundary phase identification in Al-Mg alloys." ADVANCED MATERIALS & PROCESSES 166, no. 2, 42-43 - 42-43.

2007

  • Kamal,Manish; Daehn,Glenn,S, 2007, "A uniform pressure electromagnetic actuator for forming flat sheets." JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME 129, no. 2, 369-379 - 369-379.
  • Golowin, S.; Kamal, M.; Shang, J.; Portier, J. et al., 2007, "Application of a uniform pressure actuator for electromagnetic processing of sheet metal." Journal of Materials Engineering and Performance 16, no. 4, 455-460 - 455-460.

2006

  • Gan,Wei; Zhang,Peihui; Wagoner,Robert,H; Daehn,Glenn,S, 2006, "Effect of load redistribution in transient plastic flow." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 37A, no. 7, 2097-2106 - 2097-2106.
  • S. B. Alapati, W. A. Brantley, J. M. Nussten, G. S. Daehn, T. A. Svec, J. M. Powers, W. M. Johnston, W. Gao, 2006, "Vickers hardness investigation of work-hardening in used NiTi rotary instruments." Journal of Endodontics 32, 1191-1193 - 1191-1193.

2005

  • Gan,W; Zhang,P,H; Wagoner,R,H; Daehn,G,S, 2005, "Transient plastic flow at nominally fixed structure due to load redistribution." ZEITSCHRIFT FUR METALLKUNDE 96, no. 6, 572-577 - 572-577.

2003

  • Miles,M,P; Daehn,G,S; Wagoner,R,H, 2003, "Prediction of limit strains in superplastic materials." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 34A, no. 11, 2559-2564 - 2559-2564.
  • Miles, M.P.; Daehn, G.S.; Wagoner, R.H., 2003, "Prediction of limit strains in superplastic materials." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 34 A, no. 11, 2559-2564 - 2559-2564.
  • Xin,X,J; Jayaraman,P; Daehn,G,S; Wagoner,R,H, 2003, "Investigation of yield surface of monolithic and composite powders by explicit finite element simulation." INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES 45, no. 4, 707-723 - 707-723.
  • Jiang,G; Daehn,G,S; Wagoner,R,H, 2003, "Observations on densification of Al-Al2O3 composite powder compacts by pressure cycling." POWDER METALLURGY 46, no. 1, 78-82 - 78-82.

2002

  • Turner, A; Zhang, PH; Vohnout, V; Daehn, G, 2002, "Spot impact welding of sheet aluminum." ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3 396-4, 1573-1578 - 1573-1578.
  • Fu,Y; Jiang,G; Lannutti,J,J; Wagoner,R,H; Daehn,G,S, 2002, "Effect of cyclic pressure consolidation on the uniformity of metal matrix composites." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 33, no. 1, 183-191 - 183-191.
  • Mills, MJ; Neeraj, T; Savage, MF; Tatalovich, J; Daehn, GS, 2002, "Deformation mechanisms during creep of titanium alloys at lower temperatures." CREEP DEFORMATION: FUNDAMENTALS AND APPLICATIONS 389-398 - 389-398.

2001

  • Jiang,G; Daehn,G,S; Lannutti,J,J; Fu,Y; Wagoner,R,H, 2001, "Effects of lubrication and aspect ratio on the consolidation of metal matrix composites under cyclic pressure." ACTA MATERIALIA 49, no. 8, 1471-1477 - 1471-1477.
  • Jiang,G; Daehn,G,S; Wagoner,R,H, 2001, "Void filling and cluster breaking of metal-ceramic composites under pressure cycling." SCRIPTA MATERIALIA 44, no. 2, 287-292 - 287-292.
  • Jiang,G; Daehn,G,S; Wagoner,R,H, 2001, "Inclusion particle size effects on the cyclic compaction of powder composites." SCRIPTA MATERIALIA 44, no. 7, 1117-1123 - 1117-1123.

2000

  • Neeraj,T; Hou,D,H; Daehn,G,S; Mills,M,J, 2000, "Phenonomenological and microstructural analysis of room temperature creep in titanium alloys." ACTA MATERIALIA 48, no. 6, 1225-1238 - 1225-1238.
  • Carroll,M,C; Gouma,P,I; Mills,M,J; Daehn,G,S; Dunbar,B,R, 2000, "Effects of Zn additions on the grain boundary precipitation and corrosion of Al-5083." SCRIPTA MATERIALIA 42, no. 4, 335-340 - 335-340.
  • Jiang,G; Wu,W; Daehn,G,S; Wagoner,R,H, 2000, "Experimental and numerical investigation of idealized consolidation - Part II: Cyclic compaction." ACTA MATERIALIA 48, no. 17, 4331-4335 - 4331-4335.
  • W. Wu, G. Jiang, R. H. Wagoner and G. S. Daehn, 2000, "Experimental and Numerical Investigations of Idealized Solid State Consolidation." Acta Mater 48, no. 17, 4323-4330 - 4323-4330.

1999

  • Xin,X,J; Wagoner,R,H; Daehn,G,S, 1999, "A general numerical method to solve for dislocation configurations." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 30, no. 8, 2073-2087 - 2073-2087.
  • X. J. Xin, R. H. Wagoner and G. S. Daehn, 1999, "A Numerical Method to Solve for General Dislocation Configurations: The Finite Segment Method." Materials Transactions, 30A 2073-2087 - 2073-2087.

1998

  • Xin,X,J; Daehn,G,S; Wagoner,R,H, 1998, "Modeling the generation equilibrium, and emission of dislocations at elastically misfitted particles." ACTA MATERIALIA 46, no. 17, 6131-6144 - 6131-6144.
  • X. J. Xin, R. H. Wagoner and G. S. Daehn, 1998, "Finite Segment Method for Dislocation Mechanics." Scripta Mater 39, 397-407 - 397-407.

1997

  • A.A. Tamhane, M. Padmanabhan, G. Fenton, M. Altynova and G. S. Daehn, 1997, "Opportunities in High Velocitiy Forming of Sheet Metal." Metal Forming 42-49 - 42-49.
  • Xin,X,J; Daehn,G,S; Wagoner,R,H, 1997, "Equilibrium configuration of coaxial prismatic dislocation loops and related size-dependent plasticity." ACTA MATERIALIA 45, no. 5, 1821-1836 - 1821-1836.
  • A. A. Tamnane, V. J. Vohnout, M. Padmanabhan, G. Fenton, V. S. Balanethiram, M. Altynova and G. S. Daehn, 1997, "Opportunities in the High Velocity Forming of Sheet Metal." Metal Forming 42-49 - 42-49.
  • S. Suri, T. Neeraj, G. S. Daehn, D-H Hou, J. M. Scott, R. W. Hayes and M. J. Mills, 1997, "Mechanisms of Primary Creep in ï�¡ï€¯ï�¢ Titanium Alloys at Lower Temperatures." Materials Science and Engineering A 996-999 - 996-999.

1994

  • X. Hu, R. H. Wagoner, G. S. Daehn and S. Ghosh, 1994, "Comparison of Explicit and Implicit Finite Element Methods in the Quasistatic Simulation of Uniaxial Tension." Communications in Numerical Methods in Engineering 10, 993-1003 - 993-1003.
  • X. Hu, R. H. Wagoner, G. S. Daehn and S. Ghosh, 1994, "The Effect of Inertia on Tensile Ductility." Metallurgical Transactions 25A, 2723-35 - 2723-35.
  • L. Xu and G. S. Daehn, 1994, "Allegatoring and Damage in the Cold Rolling of Spheroidized Steels." Metallurgical Transactions 25A, 589-98 - 589-98.
  • Breslin, M.C.; Ringnalda, J.; Seeger, J.; Marasco, A.L. et al., 1994, "Alumina/aluminum co-continuous ceramic composite (C4) materials produced by solid/liquid displacement reactions: Processing kinetics and microstructures." Ceramic Engineering and Science Proceedings 15, no. 4, 104-112 - 104-112.

1993

  • A. L. Marasco, J. Ringnalda, M. C. Breslin, G. S. Daehn and H. L. Fraser, 1993, "Transformation Kinetics and Properties of Co-Continuous Ceramic Composites." TMS

1991

  • H. Zhang, G. S. Daehn and R. H. Wagoner, 1991, "Simulation of the Plastic Response of Whisker Reinforced Metal-Matrix Composites Under Thermal Cycling Conditions." Scripta Metallurgica 25, 2279-84 - 2279-84.

1990

  • G. S. Daehn, H. Zhang, R. H. Wagoner, 1990, "The Temperature-Cycling Deformation of Particle Reinforce Metal Matrix Composites -- A Finite Study." Scripta Metallurgica et Materialia 24, 2151-2155 - 2151-2155.
  • Y. C. Chen, G. S. Daehn and R. H. Wagoner, 1990, "The Potential for Forming Metal Matrix Composites Via Thermal Cycling." Scripta Metallurgica et Materialia 24, 2157-2162 - 2157-2162.

Papers in Proceedings

2018

  • Cai, W.; Daehn, G.; Vivek, A.; Li, J. et al. "A state-of-The-Art review on solid-state metal joining." (1 2018).
  • Liu, B.; Palazotto, A.; Vivek, A.; Daehn, G.S. "Impact welding of wrought and additively manufactured 15-5 PH stainless steel." (1 2018).
  • Cai, W.; Daehn, G.; Vivek, U.; Li, J. et al. "A STATE-OF-THE-ART REVIEW ON SOLID-STATE METAL JOINING." in 13th ASME International Manufacturing Science and Engineering Conference. (1 2018).
  • Cai, W.; Daehn, G.; Vivek, U.; Li, J. et al. "A STATE-OF-THE-ART REVIEW ON SOLID-STATE METAL JOINING." (1 2018).

2017

  • Nassiri, A.; Zhang, S.; Abke, T.; Vivek, A. et al. "Numerical modeling of high-velocity impact welding." (1 2017).
  • Nassiri, A.; Zhang, S.; Abke, T.; Vivek, A. et al. "Numerical Modeling of High-Velocity Impact Welding." (1 2017).
  • Nassiri, A.; Zhang, S.; Abke, T.; Vivek, A. et al. "Numerical Modeling of High-Velocity Impact Welding." in 3rd Pan American Materials Congress (PAMC). (1 2017).

2016

  • Polasik, A.K.; Daehn, G.S.; McCombs, M.R. "Implementation of materials science in the high school classroom." (6 2016).
  • Yang, K.; Taber, G.; Sapanathan, T.; Vivek, A. et al. "Suitability of the electromagnetic ring expansion test to characterize materials under high strain rate deformation." (10 2016).
  • Yang, K.; Taber, G.; Sapanathan, T.; Vivek, A. et al. "Suitability of the electromagnetic ring expansion test to characterize materials under high strain rate deformation." in 12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM). (1 2016).
  • Yang, K.; Taber, G.; Sapanathan, T.; Vivek, A. et al. "Suitability of the electromagnetic ring expansion test to characterize materials under high strain rate deformation." (1 2016).

2015

  • Vivek, A.; Hansen, S.; Benzing, J.; He, M. et al. "Impact Welding of Aluminum to Copper and Stainless Steel by Vaporizing Foil Actuator: Effect of Heat Treatment Cycles on Mechanical Properties and Microstructure." (10 2015).
  • Liu, B.; Vivek, A.; Daehn, G.S. "Use of vaporizing foil actuator for impact welding of aluminum alloy sheets with steel and magnesium alloys." (1 2015).
  • Vivek, A.; Hansen, S.; Benzing, J.; He, M. et al. "Impact Welding of Aluminum to Copper and Stainless Steel by Vaporizing Foil Actuator: Effect of Heat Treatment Cycles on Mechanical Properties and Microstructure." (10 2015).
  • Vivek, A.; Hansen, S.; Benzing, J.; He, M. et al. "Impact Welding of Aluminum to Copper and Stainless Steel by Vaporizing Foil Actuator: Effect of Heat Treatment Cycles on Mechanical Properties and Microstructure." in 6th Dynamic Behavior of Materials. (10 2015).
  • Vivek, A.; Liu, B.; Sakkinen, D.; Harris, M. et al. "Impact Welding of Aluminum Alloy 6061 to Dual Phase 780 Steel Using Vaporizing Foil Actuator." (1 2015).

2014

  • Vivek, A.; Weddeling, C.; Hahn, M.; Daehn, G.S. et al. "Electrically Driven Plasma via Vaporization of Metallic Conductors: A Novel Tool for Joining Tubular Workpieces." (1 2014).
  • Weddeling, C.; Hahn, M.; Daehn, G.S.; Tekkaya, A.E. "Uniform Pressure Electromagnetic Actuator - An innovative tool for magnetic pulse welding." (1 2014).
  • Vivek, A.; Hansen, S.R.; Liu, B.C.; Daehn, G.S. "VAPORIZING FOIL ACTUATOR WELDING OF AA6061 WITH CU110: EFFECT OF HEAT TREATMENT CYCLES ON MECHANICAL PROPERTIES AND MICROSTRUCTURE." in 9th ASME International Manufacturing Science and Engineering Conference (MSEC2014). (1 2014).
  • Hansen, S.R.; Vivek, A.; Daehn, G.S. "VAPORIZING FOIL ACTUATOR: CONTROLLING THE PRESSURE PULSE FOR IMPULSE METALWORKING." in 9th ASME International Manufacturing Science and Engineering Conference (MSEC2014). (1 2014).
  • Vivek, A.; Daehn, G.S. "Vaporizing foil actuator: a versatile tool for high energy-rate metal working." in 11th International Conference on Technology of Plasticity (ICTP). (1 2014).
  • Weddeling, C.; Hahn, M.; Daehn, G.S.; Tekkaya, A.E. "Uniform Pressure Electromagnetic Actuator - An innovative tool for magnetic pulse welding." in 1st International Conference on Manufacturing of Lightweight Components. (1 2014).
  • Weddeling, C.; Hahn, M.; Daehn, G.S.; Tekkaya, A.E. "Uniform pressure electromagnetic actuator - An innovative tool for magnetic pulse welding." (1 2014).
  • Vivek, A.; Weddeling, C.; Hahn, M.; Daehn, G.S. et al. "Electrically Driven Plasma via Vaporization of Metallic Conductors: A Novel Tool for Joining Tubular Workpieces." in 1st International Conference on Manufacturing of Lightweight Components. (1 2014).
  • Vivek, A.; Daehn, G.S. "Vaporizing foil actuator: A versatile tool for high energy-rate metal working." (1 2014).
  • Boos, K.N.; Vivek, A.; Hansen, S.R.; Liu, B.C. et al. "Solid state impact welds between dissimilar metals utilizing vaporizing foil actuators: A microstructural evaluation." (1 2014).
  • Vivek, A.; Hansen, S.R.; Liu, B.C.; Daehn, G.S. "Vaporizing foil actuator welding of AA6061 with Cu110: Effect of heat treatment cycles on mechanical properties and microstructure." (1 2014).
  • Hansen, S.R.; Vivek, A.; Daehn, G.S. "Vaporizing foil actuator: Controlling the pressure pulse for impulse metalworking." (1 2014).
  • Vivek, A.; Weeldeling, C.; Hahn, M.; Daehn, G.S. et al. "Electrically driven plasma via vaporization of metallic conductors: A novel tool for joining tubular workpieces." (1 2014).
  • Vivek, A.; Hansen, S.R.; Liu, B.C.; Daehn, G.S. et al. "VAPORIZING FOIL ACTUATOR WELDING OF AA6061 WITH CU110: EFFECT OF HEAT TREATMENT CYCLES ON MECHANICAL PROPERTIES AND MICROSTRUCTURE." (1 2014).
  • Vivek, A.; Daehn, G.S. "Vaporizing foil actuator: a versatile tool for high energy-rate metal working." (1 2014).
  • Hansen, S.R.; Vivek, A.; Daehn, G.S.; ASME, "VAPORIZING FOIL ACTUATOR: CONTROLLING THE PRESSURE PULSE FOR IMPULSE METALWORKING." (1 2014).

2010

  • Zhang, Y.; Babu, S.S.; Daehn, G.S. "Interfacial ultrafine-grained structures on aluminum alloy 6061 joint and copper alloy 110 joint fabricated by magnetic pulse welding." (9 2010).
  • Zhang, Y.; Babu, S.S.; Daehn, G.S. "Interfacial ultrafine-grained structures on aluminum alloy 6061 joint and copper alloy 110 joint fabricated by magnetic pulse welding." in 6th International Symposium on Ultrafine Grained Materials. (9 2010).
  • Unocic, R.R.; Unocic, K.A.; Hayes, R.W.; Daehn, G.S. et al. "A TEM study of creep deformation mechanisms in allvac 718plus." (12 2010).
  • Zhang, Y.; Babu, S.S.; Daehn, G.S. "Interfacial ultrafine-grained structures on aluminum alloy 6061 joint and copper alloy 110 joint fabricated by magnetic pulse welding." (9 2010).

2009

  • Zhang, Y.; Daehn, G.; L'Eplattenier, P.; Babu, S. "Experimental Study and Numerical Simulation on Magnetic Pulse Welding for Pre-Flanged AA6061-T6 and Cu101 Sheets." in 8th International Conference on Trends in Welding Research. (1 2009).
  • J. Shang, L. Wilkerson, S. Hatkevich, G. S. Daehn, S. Srinivasan, H. Wang and J. R. Bradley "Low-Cost Manufacturing of Fuel Cell Bipolar Plates by Electromagnetic Forming." in Emerging Materials Forming Technology, MS&T Proceedings. (1 2009).
  • Zhang, Y.; Daehn, G.; L'Eplattenier, P.; Babu, S. "Experimental Study and Numerical Simulation on Magnetic Pulse Welding for Pre-Flanged AA6061-T6 and Cu101 Sheets." (1 2009).
  • Shang, J.; Wilkerson, L.; Hatkevich, S.; Daehn, G.S. et al. "Low-cost manufacturing of fuel cell bipolar plates by electromagnetic forming." (12 2009).
  • Leire Vadillo, Iñaki Pérez, Iñaki Eguía, Mª Ángeles Gutiérrez, Beatriz González, Uwe Paar, Glenn S. Daehn and Rafel Iturbe "Springback Elimination in Structural Components by Means of Electromagetic Forming." in SAE Paper 940850, Proceedings of SAE World Congress and Exhibition. (1 2009).
  • Fenton, G.; Daehn, G.; Taber, G.; Vogler, T. et al. "Dynamic characterization of granular materials." (12 2009).
  • Vadillo, L.; Pérez, I.; Eguía, I.; Gutiérrez, M.A. et al. "Springback elimination in structural components by means of electromagnetic forming." (12 2009).
  • Zhang,Yuan; Daehn,Glenn; L'Eplattenier,Pierre; Babu,Suresh in 8th International Conference on Trends in Welding Research. (1 2009).
  • Zhang, Y.; Daehn, G.; L'Eplattenier, P.; Babu, S. "Experimental study and numerical simulation on Magnetic Pulse Welding for pre-flanged AA6061-T6 and Cu101 sheets." (12 2009).
  • G. Fenton, G. S. Daehn, G. Taber, T. Vogler, and D. Grady "Dynamic Characterization of Granular Materials." in Proceedings of Society of Engineering Mechanics. (6 2009).
  • J. R. Johnson, G. K. Fenton, G. Taber, A. Vivek and G. S. Daehn "High Strain Rate Constitutive Relations and Ductility Parameters via Electromagnetic Launch and Velocimetry." in Proceedings International Deep Drawing Research Group, Golden CO. (1 2009).

2008

  • G.S. Daehn and K.A. Unocic "TEM Sample Preparation Method for Grain Boundary Phase Identification in Al-Mg alloys." in Adv Mat Proc. (1 2008).
  • Daehn, G.S.; Unocic, K.A. "TEM sample preparation method for grain boundary phase identification in Al-Mg alloys." (2 2008).
  • Daehn, G.S.; Unocic, K.A. "TEM sample preparation method for grain boundary phase identification in Al-Mg alloys." (2 2008).
  • P. Jimbert, I. Eguia, M. A. Gutierrez, B. Gonzalez, G. S. Daehn, Y. Zhang, R. Andersson, H. Sundberg, S. O. Olsson, P. Brännström "Flanging and Hemming Auto Body Panels using Electromagetic Forming." in Proceedings of Third International Conference on High Speed Forming. (1 2008).
  • Unocic, K.A.; Mills, M.J.; Daehn, G.S. "Challenges in preparing aluminum alloys for grain boundary characterization." (8 2008).
  • I. Henchi, P. L’Eplattenier, G. S. Daehn, Y. Zhang, A. Vivek and N. Stander "Material Constitutive Parameter Identification Using an Electromagnetic Ring Expansion Experiment Coupled with LS-DYNA and LS-OPT." in 10th International LS-DYNA Users Conference. (1 2008).
  • Y. Zhang, P. L’Eplattenier, G. Taber, A. Vivek, G. S. Daehn and S. Babu "Numerical Simulation and Experimental Study for Magnetic Pulse Welding Process on AA6061-T6 and Cu101 Sheet." in 10th International LS-DYNA Users Conference. (1 2008).

2007

  • Jimbert, P.; Perez, I.; Eguia, I.; Daehn, G. "Straight hemming of aluminum sheet panels using the electromagnetic forming technology: First approach." (5 2007).
  • Golowin,Scott; Kamal,Manish; Shang,Jianhui; Portier,Jake; Din,Ahmad; Daehn,Glenn,S; Bradley,John,R; Newman,Keith,E; Hatkevich,Steve "Application of a uniform pressure actuator for electromagnetic processing of sheet metal." in Materials Science and Technology Conference and Exhibition 2006. (8 2007).
  • del Rio, E.; Nash, J.M.; Williams, J.C.; Breslin, M.C. et al. "Co-continuous composites for high-temperature applications." (8 2007).
  • Golowin, S.; Kamal, M.; Shang, J.; Portier, J. et al. "Application of a uniform pressure actuator for electromagnetic processing of sheet metal." in Meeting on Materials Science and Technology. (8 2007).
  • Golowin, S.; Kamal, M.; Shang, J.; Portier, J. et al. "Application of a uniform pressure actuator for electromagnetic processing of sheet metal." (8 2007).
  • G.S. Daehn "Agile Sheet Metal Forming: Basic Concepts and the Role of Electromagnetic Metal Forming." in Proceedings from IDDRG 2007. (5 2007).
  • P. Jimbert et. al. "Hemming of Aluminum Sheet Panels Using the Electromagnetic Forming Technology." in Proceedings from IDDRG 2007. (5 2007).
  • Jimbert, P.; Perez, I.; Eguia, I.; Daehn, G. "Straight hemming of aluminum sheet panels using the electromagnetic forming technology: First approach." (1 2007).
  • Jimbert, P.; Perez, I.; Eguia, I.; Daehn, G. "Straight hemming of aluminum sheet panels using the electromagnetic forming technology: First approach." in 12th International Conference on Sheet Metal (SheMet 2007). (1 2007).
  • del Rio,Eduardo; Nash,James,M; Williams,James,C; Breslin,Michael,C; Daehn,Glenn,S "Co-continuous composites for high-temperature applications." in Symposium on Processing and Mechanical Response of Engineering Materials held at the 2006 TMS Annual Meeting. (8 2007).
  • del Rio, E.; Nash, J.M.; Williams, J.C.; Breslin, M.C. et al. "Co-continuous composites for high-temperature applications." (8 2007).
  • del Rio, E.; Nash, J.M.; Williams, J.C.; Breslin, M.C. et al. "Co-continuous composites for high-temperature applications." in Symposium on Processing and Mechanical Response of Engineering Materials held at the 2006 TMS Annual Meeting. (8 2007).

2006

  • P. Jimbert, A. Arroyo, I. Eguia, J. I. Fernandez, E. Silveria, I Garuz and G. S. Daehn "Efficiency Improvement and Analysis of Microstructure Associated with Use of a Uniform Pressure Actuator." in Proceedings from 2nd Annual ICHSF 2006. (3 2006).
  • Manish Kamal, Vincent Cheng, John Bradley, Steve Hatkevich, Glenn S. Daehn "Design, Construction, and Applications of the Uniform Pressure Electromagnetic Actuator." in Proceedings from 2nd Annual ICHSF 2006. (3 2006).
  • E. Iriondo, B. González, M. A. Gutiérrez, G. S. Daehn "New Approach for Springback Correction: Electromagnetic Impulses." in Proceedings from the International Conference New Developments in Sheet Metal Forming. (5 2006).
  • E. Iriondo, B. Gonzalez, M. Gutierrez, V. Vonhout, G. Daehn, B. Hayes "Electromagnetic Springback Reshaping." in Proceedings from 2nd Annual ICHSF 2006. (1 2006).
  • M. Kamal, V. Cheng, T.K. Sue, J. Shang and G.S. Daehn "Replication of Microfeatures by Electromagnetic Launch and Impact." in Proceeding from International Conference on Micromanufacturing. (9 2006).

2005

  • Edurne Iriondo, Beátriz Gonzalez, Iñaki Eguia, Marian Gutiérrez, Glenn Daehn "Experimental Study of Spingback Elimination Using Electromagnetic Forming." in Proceedings from the 2005 DDRG: Conference. (6 2005).

2004

  • Zhang, P.; Kimchi, M.; Shao, H.; Gould, J.E. et al. "Analysis of the electromagnetic impulse joining process with a field concentrator." (1 2004).
  • Zhang, P; Kimchi, M; Shao, H; Gould, JE; Daehn, GS "Analysis of the electromagnetic impulse joining process with a field concentrator." (1 2004).
  • Daehn, G.S.; Brehm, H.; Lee, H.; Lim, B.S. "A model for creep based on microstructural length scale evolution." (12 2004).
  • Zhang, P.; Kimchi, M.; Shao, H.; Gould, J.E. et al. "Analysis of the electromagnetic impulse joining process with a field concentrator." in 8th International Conference on Numerical Methods in Industrial Forming Processes. (1 2004).
  • V.J. Vohnout, J Shang, G.S. Daehn "Improved Formability by Control of Strain Distribution in Sheet Stamping Using Electromagnetic Impulses." in Proceedings from ICHSF. (3 2004).
  • Daehn, G.S.; Brehm, H.; Lee, H.; Lim, B.S. "A model for creep based on microstructural length scale evolution." in 13th International Conference on Strength of Materials (ICSMA 13). (12 2004).
  • Daehn, G.S.; Brehm, H.; Lee, H.; Lim, B.S. "A model for creep based on microstructural length scale evolution." (12 2004).
  • I. Eguia, P. Zhang, G.S. Daehn "Improved Crimp-joining of Aluminum Tubes onto Mandrels with Undulating Surfaces." in Proceedings from ICHSF. (3 2004).

2002

  • Brehm, H.; Daehn, G.S. "A framework for Modeling creep in pure metals." (2 2002).
  • Li,D; Brantley,W,A; Mitchell,J,C; Daehn,G,S; Monaghan,P; Papazoglou,E "Fatigue studies of high-palladium dental casting alloys: Part 1. Fatigue limits and fracture characteristics." in 30th Annual Meeting of the American-Association-of-Dental-Research. (4 2002).
  • Vohnout, V.J.; Daehn, G.S. "Effect of quasi-static prestrain and eddy currents on limit strains in electromagnetic pulse forming of two aluminum alloys." (1 2002).
  • Vohnout, V.J.; Daehn, G.S. "Effect of quasi-static prestrain and eddy currents on limit strains in electromagnetic pulse forming of two aluminum alloys." (1 2002).
  • A. Turner, P. Zhang, V.J. Vohnout and G.S. Daehn "Spot Impact Welding of Sheet Aluminum." in Materials Science Forum; Proceedings of the 8th International Conference ICAA8. (7 2002).
  • Carroll, M.C.; Buchheit, R.G.; Daehn, G.S.; Mills, M.J. "Optimum trace copper levels for SCC resistance in a Zn-modified Al-5083 alloy." (12 2002).
  • Carroll, M.C.; Buchheit, R.G.; Daehn, G.S.; Mills, M.J. "Optimum trace copper levels for SCC resistance in a Zn-modified Al-5083 alloy." (1 2002).
  • Daehn, G.S.; Brehm, H.; Lim, B.S. "A scaling analysis of recovery creep." (12 2002).
  • Brehm, H.; Daehn, G.S. "A framework for modeling creep in pure metals." (2 2002).
  • Carroll, M.C.; Buchheit, R.G.; Daehn, G.S.; Mills, M.J. "Optimum trace copper levels for SCC resistance in a Zn-modified Al-5083 alloy." in 8th International Conference on Aluminium Alloys. (1 2002).
  • Mills, M.J.; Neeraj, T.; Savage, M.F.; Tatalovich, J. et al. "Deformation mechanisms during creep of titanium alloys at lower temperatures." (1 2002).
  • Daehn, G.S.; Brehm, H.; Lim, B.S. "A scaling analysis of recovery creep." (1 2002).
  • M. C. Carroll, R. G. Buchheit, G. S. Daehn and M. J. Mills "Optimum trace copper levels for SCC resistance in a Zn-modified Al-5083 alloy." (1 2002).
  • M. J. Mills, T. Neeraj, M. F. Savagae, J. Tatalovich and G. S. Daehn "Deformation Mechanisms During Creep of Titanium Alloys at Low temperatures." in Creep Deformation: Fundamenetals and Applications. (1 2002).
  • Brehm, H.; Daehn, G.S. "A framework for Modeling creep in pure metals." in Joint Applied Mechanics and Materials Summer Conference. (2 2002).
  • Daehn, G.S.; Brehm, H.; Lim, B.S. "A scaling analysis of recovery creep." in 3rd Symposium on Modeling the Performance of Engineering Structural Materials. (1 2002).
  • Mills, M.J.; Neeraj, T.; Savage, M.F.; Tatalovich, J. et al. "Deformation mechanisms during creep of titanium alloys at lower temperatures." in Symposium on Creep Deformation - Fundamentals and Applications. (1 2002).
  • G. S Daehn, H. Brehm and B-S Lim "A Scaling Analysis of Recovery Creep." in Modeling the Performance of Engineering Structural Materials III, Proceedings of TMS Fall Meeting. (1 2002).
  • Vohnout, V.J.; Daehn, G.S. "Effect of quasi-static prestrain and eddy currents on limit strains in electromagnetic pulse forming of two aluminum alloys." in Annual Meeting on Automotive Alloys and Aluminum Sheet and Plate Rolling and Finishing Technology. (1 2002).

2001

  • Thirumalai, N.; Savage, M.F.; Mills, M.J.; Daehn, G.S. "Primary creep in polycrystalline alpha titanium: Coupled observations and a Stochastic cellular automation model." in 9th International Conference on Creep and Fracture of Engineering Materials and Structures. (1 2001).
  • T. Neeraj, M. F. Savage, M. J. Mills and G. S. Daehn "Primary Creep in Polycrystalline Alpha Titanium Alloys: Coupled Observations and Stochastic Cellular Automaton Model." in Creep and Fracture of Engineering Materials and Structures. (1 2001).
  • Thirumalai, N.; Savage, M.F.; Mills, M.J.; Daehn, G.S. "Primary creep in polycrystalline alpha titanium: Coupled observations and a Stochastic cellular automation model." (1 2001).
  • N. Thirumalai, M.F. Savage, M. J. Mills and G. S. Daehn "Primary Creep in Polycrystalline Alpha-Titanium: Coupled Observations and a Stochastic Cellular Automaton Model." in Proceedings of the 9th International Conference on Creep and Fracture of Engineering Materials and Structures. (1 2001).

1999

  • M.C. Carroll, M. J. Mills G. S. Daehn, P. I. Gouma, M. F. Savage and B. R. Dunbar "Effects of Minor Sc and Zr Additions on Commercial Al-Mg-Mn Alloys." in TMS Proceedings: Aluminum Alloys for Automotive Applications. (1 1999).
  • G. S. Daehn, G. B. Viswanathan, M. J. Mills and V. K. Vasudevan "A Model of Creep Based on Interacting Elements and Its Application to the Primary Creep of Fully-Lamellar -TiAl." in Creep of Alloys for the 21st Century. (1 1999).
  • Daehn, G.S.; Viswanathan, G.B.; Mills, M.J.; Vasudevan, V.K. "A model of creep based on interacting elements and its application to the primary creep of fully-lamellar gamma-TiAl." (1 1999).
  • Glenn S. Daehn, G. B. Viswanathan, Michael J. Mills and V. K. Vasudevan "A Model of Creep Based on Interacting Elements and its Application to the Primary Creep of Fully-Lamellar -TiAl." in Creep and Creep Resistant Materials for the 21st Century. (1 1999).
  • V. J. Vohnout, G. S. Daehn and R. Shivpuri "A Hybrid Quasi-Static-Dynamic Process for Increased Limiting Strains in the Forming of Large Sheet Aluminum Parts." in Advanced Technology of Plasticity, Proceedings of the 6th ICTP Conf.. (1 1999).
  • Daehn, G.S.; Viswanathan, G.B.; Mills, M.J.; Vasudevan, V.K. "A model of creep based on interacting elements and its application to the primary creep of fully-lamellar gamma-TiAl." in Symposium on Creep Behavior of Advanced Materials for the 21st-Century, at the 1999 TMS Annual Meeting. (1 1999).

1998

  • L. Ceschini, M.C. Breslin, G.S. Dahen, G.L. Garagnani, G. Poli "Tribiological behaviour of Al-20%Si/Al2O3 high reinforcement content composites produced by a displacement reaction." in Proceedings of ECCM-8 (European Conference on Composite Materials), Napoli, 3-6 giugno. (1 1998).

1997

  • S. Suri, T. Neeraj, G. S. Daehn, D.-H. Hou, J. M. Scott, R. W. Hayes and M. J. Mills "Mechanisms of Primary Creep in Titanium Alloys at Lower Temperatures." in Creep and Fracture of Engineering Materials and Structures. (1 1997).
  • L.Ceschini, G.S. Dahen, G.L.Garagnani, C.Martini "Microstructure and tribological properties of a co-continuous alumina/aluminum composite." in Proceedings of the "5th European Conference on Advanced Materials andApplications", Vol.3 - Surface Engineering and Functional Materials, Netherlands Society for Materials Science. (1 1997).
  • Ceschini, L.; Daehn, G.S.; Garagnani, G.L.; Martini, C. "Microstructure and tribological properties of a co-continuous alumina/aluminum composite." in 5th European Conference on Advanced Materials and Processes and Applications (EUROMAT 97). (1 1997).
  • Ceschini, L.; Daehn, G.S.; Garagnani, G.L.; Martini, C. "Microstructure and tribological properties of a co-continuous alumina/aluminum composite." (1 1997).
  • Suri, S.; Neeraj, T.; Daehn, G.S.; Hou, D.H. et al. "Mechanisms of primary creep in α/β titanium alloys at lower temperatures." (8 1997).
  • Suri, S.; Neeraj, T.; Daehn, G.S.; Hou, D.H. et al. "Mechanisms of primary creep in alpha/beta titanium alloys at lower temperatures." in 11th International Conference on the Strength of Materials (ICSMA-11). (8 1997).
  • Suri, S.; Neeraj, T.; Daehn, G.S.; Hou, D.H. et al. "Mechanisms of primary creep in alpha/beta titanium alloys at lower temperatures." (8 1997).

1995

  • Daehn, G.S.; Balanethiram, V.S.; Hu, X.Y.; Altynova, M. et al. "Hyperplastic forming of sheets - A competitor to superplastic forming?." (1 1995).
  • Daehn, G.S.; Balanethiram, V.S.; Hu, X.; Altynova, M. et al. "Hyperplastic forming of sheets - a competitor to superplastic forming?." (12 1995).
  • Daehn, G.S.; Balanethiram, V.S.; Hu, X.Y.; Altynova, M. et al. "Hyperplastic forming of sheets - A competitor to superplastic forming?." in Conference on Superplasticity and Superplastic Forming, at the TMS Annual Meeting. (1 1995).

1994

  • M. C. Breslin, J. Ringnalda, J. Seeger, A. L. Marasco, G. S. Daehn and H. L. Fraser "Alumina/Aluminum Co-Continuous Ceramic Composites Produced by Solid-Liquid Displacement Reactions: Processing Kinetics and Microstructures." in Ceramic Entineering and Science Proceedings. (1 1994).
  • MARASCO, A.L.; RINGNALDA, J.; BRESLIN, M.C.; DAEHN, G.S. et al. "TRANSFORMATION KINETICS OF THE REACTION BETWEEN SILICA GLASS AND ALUMINUM TO PRODUCE AN AL2O3 AL COMPOSITE." (1 1994).
  • MARASCO, A.L.; RINGNALDA, J.; BRESLIN, M.C.; DAEHN, G.S. et al. "TRANSFORMATION KINETICS OF THE REACTION BETWEEN SILICA GLASS AND ALUMINUM TO PRODUCE AN AL2O3 AL COMPOSITE." in Symposium on Processing and Fabrication of Advanced Materials III, at the Minerals-Metals-and-Materials-Society Materials Week 93. (1 1994).

1993

  • Breslin, M.C.; Xu, L.; Daehn, G.S.; Fraser, H.L. "Applications of co-continuous ceramic composite materials for automotive components." (12 1993).

1992

  • Hongyan Zhang, Glenn S. Daehn & R. H. Wagoner "Finite Element Simulation of Thermal Cycling Deformation of Metal Matrix Composites." in Numerical Methods in Industrial Forming Processes - NUMIFORM '92. (1 1992).
  • ZHANG, H.Y.; DAEHN, G.S.; WAGONER, R.H. "FINITE-ELEMENT SIMULATION OF THERMAL CYCLING DEFORMATION OF METAL MATRIX COMPOSITES." in 4TH INTERNATIONAL CONF ON NUMERICAL METHODS IN INDUSTRIAL FORMING PROCESSES ( NUMIFORM 92 ). (1 1992).
  • ZHANG, H.Y.; DAEHN, G.S.; WAGONER, R.H. "FINITE-ELEMENT SIMULATION OF THERMAL CYCLING DEFORMATION OF METAL MATRIX COMPOSITES." (1 1992).

1991

  • T. C. Lowe, P. Follansbee, T. Rollett, and G. S Daehn eds., "Modeling the Deformation of Crystalline Solids, Physical Theory, Application and Experimental Comparisons." in New Orleans. (1 1991).

1990

  • Daehn, G.S. "Effects of environmental and microstructural variables on the plastic deformation of metal matrix composites under changing temperature conditions." (8 1990).

1988

  • G. S. Daehn "Effects of Environmental and Microstructrural Variables on the Plastic Deformation of Metal Matrix Composites Under Changing Temperature Concitions." in Proceedings -- ASTM Symposium on Thermal and Mechanical Behavior of Ceramic and Metal Matrix Composites. (1 1988).

Patents

  • John, R. Bradley, James G. Schroth and Glenn S. Daehn. "Electromagetic Formation of Fuel Cell Plates." Patent number: U.S. Patent 7,076.981
  • G. S. Daehn. "“Electromagnetic Metal Forming” (Uniform Pressure Actuator." Patent number: U. S. Patent, 2,069,756
  • G. S. Daehn, V. J. Vohnout and A. Tamhane. "Electromagnetic actuator, method of use and article made therefrom." Patent number: U. S. Patent 5,860,306
  • G. S. Daehn, V. J. Vohnout, L. DuBois. "Hybrid matched tool-electromagnetic forming apparatus incorporating electromagnetic actuator." Patent number: U.S. Patent 6,047,582
  • G. S. Daehn, V. J. Vohnout and L. DuBois. "Hybrid matched tool-electromagnetic forming apparatus." Patent number: U. S. Patent 6,050,120
  • G. S. Daehn and V. J. Vohnout. "Hybrid methods of forming using electromagnetic forming." Patent number: U.S. Patent 6,050,121
  • G. S. Daehn, V. J. Vohnout and E. A. Herman. "Hybrid matched tool forming methods." Patent number: U. S. Patent 6,085, 562
  • G. S. Daehn and Vincent J. Vohnout. "Hybrid Matched Tool-Hydraulic Forming Methods." Patent number: U.S. Patent 6,227, 023
  • G. S. Daehn. "High Velocity Forming of Local Features Using a Projectile." Patent number: U. S. Patent 7,000,300
  • Glenn S. Daehn. "Electromagnetic Actuator for Multiple Operations." Patent number: PCT Applicaton: PCT/US08/61066
  • Glenn D. Daehn and John C. Lippold.. "Low Temperature Spot Impact Welding Driven Without Contact." Patent number: PCT Application: PCT/US09/36499
  • John R. Bradley and Glenn S. Daehn. "Driver Plate for Electromagnetic Forming of Sheet Metal." Patent number: US Patent Application 2009/0090162
  • M. C. Carroll, M. J. Mills, R. G. Buchheit, G. S. Daehn, B. Morere, P. Kobe, and H. S. Goodrich. "5000 series alloys with improved corrosion properties and methods for their manufacture and use." Patent number: US Patent Application 10/628579